Stylish Fiberglass Porch Columns
Fiberglass porch columns – Arches and columns are two architectural details that enjoyed popularity during the 1880s and 1890s as important elements of a style known as Romanesque Revival. This style has strong European tones; incorporate elements of this style in your home will give it more of an old world flavor. You do not need to completely reconstruct your house to achieve this look.
Vinyl and fiberglass porch columns cannot support the weight in the same way as other columns, but homeowners should still consider them as decorative columns that can be installed quickly and typically good weather. Vinyl and fiberglass columns are available in many different shapes and colors, and are less expensive than stone and pre-cast stone. Fiberglass columns are often used to help strengthen and hold up the porches. They are an alternative to wooden columns and does not rot or corrode when exposed to outdoor elements like wood will eventually. When you build something with a fiberglass column, is one of the first steps to create a safe and stable base to set the column in. One of the materials that you can use to make this base’s mortar.
12 Photos Gallery of: Stylish Fiberglass Porch Columns
Select an area on the ground where fiberglass porch columns will be installed. Spray paint the area so that you know exactly where to dig. Measure the size of the base of the glass column and register the measurement. Dig a hole in the ground about 6 inches deep and with a diameter of 1 to 2 inches wider than the column you want to install in the hole. Push the shovel in the ground and move the dirt aside.
Place a £ 80 bag of mortar in a wheelbarrow. Cut it with a utility knife and dump it in. Add four liters of water and mix the two together with a trowel. Move back and forth on the putty until it reaches the consistency of peanut butter. Add more water if needed, but generally four liters is the recommended amount for a 80-lb. bag of mortar. Stir it up with putty until it is all mixed; pour the mixture from the wheelbarrow into the base you dug. Fill up until it is level with the top of the soil. Smooth out the surface with a bull float until it is level and even throughout. Let dry overnight. Pressure on the surface and make sure it is dry to the touch. Set the fiberglass porch columns at the top and make sure it fits properly on the mortar base before installing it.