Instructions For AKDY Range Hood Installation

Home » Home Ideas » Instructions for AKDY Range Hood Installation

AKDY Range Hood – Many people will not use the existing range hoods because it is old and cause too much noise. Unfortunately, if you do not use it when cooking, it can lead to odors, smoke and steam spread throughout your home. And then cause problems later on. However, the installation of a range hood that has a simple procedure. Where it is something that you can complete yourself in the morning.

Posted on December 3, 2017 Home Ideas

The first thing you should do is to replace the old with the new AKDY range hood that is the area of your kitchen. Once this is done then you can perform the next steps. But to replace it you will need someone to help you. Make sure also that you have the right size of the hood. And remember that new ones should overlap the stove top on each side about 3 inches.

13 Photos Gallery of: Instructions for AKDY Range Hood Installation

Akdy Range Hood FilterSize: 1024 x 768

Akdy Island Range HoodSize: 1024 x 768

Akdy Range Hood PartsSize: 1024 x 768

First you need to find an electrical connection to a particular device of AKDY range hood. Often located in places close to the brightest spot on the hood. Once you get the wires you need to remove it is to remove the wire nut. Once the cable lose you will need to separate the connection. Now you’ve let go of the cord, so now you need to ask someone to lift the hood while you loosen the screws that hold it. Remove the hood off of the screws that supported it and then put it to one side. Then you will eventually be able to remove the screws completely.

RELATED TOPIC :   How To Repair Pedicure Sinks Faucet Handle

You now have to measure the height under the AKDY range hood of the old machine is placed. Hopefully if the height of about 24 to 30 inches from the top of the stove, then this is fine. But if not, then you will need to make some changes. Namely to ensure that the basic distance from the top of the stove hood falls within this range. And also make sure that you have enough cable as well.

Once you have replaced the old with the new AKDY range hood. Of course by doing the steps above. Then you will need to tighten the screws used to support. Also you should make sure that they are completely safe. End of things you need to do after you complete the installation of your hood is to test their electricity. That is by turning on the fan and lights to see if it is working properly.